Miller XMT 300 CC/CV DC Portable Inverter Arc Multiprocess Welder

Miller XMT 300 CC/CV DC Portable inverter Arc Welder with Auto-Link

$1,000.00

Heavy Industrial CC/CV DC 3 Phase 1 Phase

Easy to transport from job to job

Processes

*MIG (GMAW)

*Pulsed MIG (GMAW-P)

*Stick (SMAW)

*TIG (GTAW)

*Flux cored (FCAW)

*Air Carbon Arc

*Cutting and goughing (CAC-A)

Stick welding

TIG welding (scratch start or with addition of a high frequency unit and TIG torch and pedal)

MIG welding with voltage sensing variable speed suitcase wire feeds that accept CC units. It can be used with MIG wire feeds that require CV output.

It has Auto-Link, which means that it can run off regular household single phase 220v, or from 220v three phase, 460v single or three phase, without any rewiring.

Fan-On-Demand- Cooling System operates only when needed, reducing noise, energy use and amount of contaminants pulled through machine.

Lightweight, aerospace-grade aluminum case offers protection with the benefit of reduced weight

Large, dual digital meters are easy to view and preset to ease setting well output.

Serial No. KG017660 Stock No. 903277

Volts 230/460

Hertz 50/60

Rated Output

Volts 32

Amps 300

Duty cycle 60%

Max DCV 80

Output 300 amps at 60% duty cycle

Dimensions

H 17" X W 12 1/2" X D 24"

Net Weight 79.5 lb

Comes with leads for stick

RFCS-14 foot control never used.

power cord is 10' long and is set up to plug into a 30 or 50 amp rec.

This is a link to the Owners manual:

http://www.millerwelds.com/om/o2205l_mil.pdf

Call Bryan with any questions 916-868-9289

askaubry@yahoo.com